установка-оригинальной-мак-ос-на-пк
Сообщений 21 страница 30 из 40
Поделиться302009-11-16 22:31:50
BootCDMaker
boot-132-на-базе-chameleon-2-rc3-r658/page__hl__BootCD__st__20
Try this..
1. If AHCI, SATA, or RAID controllers are avialble, set them to enabled
2. If Speed Step is present, set to disabled
3. If EIST is present, set to disabled
4. HPET set to 64-Bit Mode
5. If you have an IDE controller, set to disabled
Also try this..
1. Boot the computer into the BIOS settings.
2. Under the Advanced BIOS Features menu, set:
o HDD S.M.A.R.T. Capability [Enabled]
o CPU Enhanced Halt [Disabled]
o CPU Thermal Monitor [Disabled]
o CPU EIST Function [Disabled]
3. Under the Integrated Peripherals menu, set:
o USB Keyboard Function [Enabled]
o USB Mouse Function [Enabled]
o SATA RAID/AHCI Mode [AHCI]
o Onboard SATA/IDE Device [AHCI]
4. Under the Power Management Setup menu, set:
o HPET Mode [64-bit Mode]
5. Save changes.
6. Exit BIOS Settings.
I got this from Psystar..site..might help..
Good luck..